The Chrome Plated Steel Tow Hooks part # 63029 are a universal fit item and we have not had the chance to test the fitment of these on a 1995 GMC K1500 yet. Most likely you will need to drill two holes in each side of the frame to attach the tow hook. The tow hook is 5-1/2" long x 1-14" wide and the bolt holes are spaced 1-1/2" apart on center with a 1/2" diameter. The overall height of the hook is 3" and the distance from the top hole closest to the end of the hook is 3-1/4". I have also... view full answer...
For your 1989 GMC K1500 4WD Extended Cab with the 10" Drop bumper I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15317 as it is designed to work with the 10" drop bumper on your truck, and has a 2400lb tongue weight rating and a 16000lb trailer weight rating making it a very heavy duty hitch. While this hitch has high ratings your truck may not so I recommend checking the owner's manual to find your trucks towing capacity and using the lower ratings between... view full answer...
There is absolutely a way for you to get an extension of at least 3 feet with your 1996 GMC 2500 C/K so you can take your boat along when using your truck camper.
To do this you will need to install the TorkLift SuperHitch Original Trailer Hitch Receiver # TLC1201, which fits your '96 GMC 2500, so long as you have the standard or step bumper. Adding this hitch is the only way to get an extender which is long enough to meet your needs.
With this hitch installed you can then add the hitch... view full answer...
We've had this question before and Reese has told us that you can use Goose Boxes like the # RP85FR with recessed flat bed trucks but the recessed portion of the truck bed needs to be less than 5 inches tall and larger than 15 inch wide by 15 inch long. view full answer...
The exact brackets and base rails you will need for your 1995 GMC with a 6-1/2 foot bed is the following:
- Demco Premier Series Above-Bed Base Rails and Universal Install Kit for 5th Wheel Hitches # DM8552009-71 view full answer...
A Sierra Grande is a C/K Series pickup, and so long as your 1980 GMC C/K truck has an 8 foot bed with a standard bumper, then yes, the following Draw-Tite hitch will fit:
- Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41001
Additionally, if you also need a trailer wiring harness, you can add a 4-flat connector to your truck by adding the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118311.
I have added a link below to the instructions of the hitch and the harness... view full answer...
Yes, you can use B&W gooseneck trailer hitch # BWGNRK1400 on your 1984 GMC dually pickup truck. Dually models are not excluded and it fits 1/2 tons up to 1-tons. I have included a link to the installation instructions for you. view full answer...
The Erickson Flip-Up Stake Pocket Anchors # EM01006 are not a vehicle-specific item but you can use their dimensions to help determine if they will fit in the stake pockets on your 1987 GMC pickup. The base that covers the stake pocket measures 3-3/4 x 2-1/4 and the lower bracket that secures it inside the stake pocket measures 2-1/8 x 2-1/8. Naturally, this lower bracket must fit within the pocket opening.
If you refer to the linked photo that shows a side/underneath view you'll be able... view full answer...
The Curt Trailer Hitch Receiver # C15325 is confirmed to fit your 1996 GMC Sierra XLE as long as you have either the standard or step bumper. It will not fit if your GMC has a roll pan, or deep drop bumper.
For a deep drop bumper Curt Trailer Hitch Receiver # C15317 is the one I recommend.
The Curt Trailer Hitch Receiver # 13942 will fit with a roll pan rear bumper of 1500 series trucks.
You will need a Hopkins Plug-In Simple Vehicle Wiring Harness # 41125 to give you a 4-way flat... view full answer...
The Draw-Tite Class III Trailer Hitch, # 75034, will fit your 1987 GMC 1500 as long as it does not have a deep drop bumper. If your truck has an 8 ft bed and a deep drop bumper, then you will instead need the Draw-Tite Trailer Hitch, # 41504. I have attached a photo of a typical deep drop bumper if you are not familiar with them.
If your truck has a 6 ft bed, then you will need additional hardware to complete the installation. You will need six 3/8 inch spacer blocks, # 01077-011, and... view full answer...
Yes, you can still use the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC1329 on your 1971 GMC C/K pickup with the 6' bed. The cover will lock in place still but since you do not have a locking tailgate anything you put inside your bed will not be secured. view full answer...
We do have a universal Mat # DZ85005 you can use as we no longer carry custom fit mats for your 1972 GMC Sierra Grande with 8' long bed. This mat is 8' long and 4' wide.
We also have the DeeZee Universal Truck Tailgate Mat # DZ86700 which is 60" x 19-1/2". This mat will need to be screwed in place. view full answer...
Your truck is most likely going to weigh more than 5,000 lbs. I looked up the weights of your truck and depending on how it is equipped it could weight between 4,299 lbs and 5,470 lbs.
For a very popular tow bar that has up to a 6,000 lb capacity we have the Roadmaster Falcon 2 part # RM-520 which would work well for you. view full answer...
Since RV water heater manufacturers have changed with the times you will have a bit of work to do to get any new water heater to fit correctly. The best option we currently carry is the Furrion RV Tankless Water Heater # FR93FR.
This water heater is 12-5/8" wide x 12-5/8" tall x 19-1/4" deep so you'll likely need to frame in the cutout hole a bit for this new unit to mount to. You can then cover any gaps with some thin pieces of plywood or any other material of your choice since the access... view full answer...
Thank you for your purchase of the Yakima OnRamp Bike Rack for 2 Electric Bikes # Y36FR!
Yes, if you don't like how the clamps of the OnRamp connect to your Aventon Level e-bikes then you'll want to use the Swagman Bike Frame Adapter Bar # S57FR for an easier connection that is a little more centered over the frame. If the Yakima clamp won't fit over the top tube of your standard frame bike then this adapter bar would come in handy as a better point to secure the bike as well.
Attached... view full answer...
Yes. The Derale Tube-Fin Engine Oil Cooler # D15505 is a universal fit product that is designed to work on a large number of vehicles without any major modifications. This is a complete kit that includes a variety of installation hardware to fit multiple vehicles including: a 3/8" NPT sandwich adapter, 3/4-16, 13/16-16, 18 x 1.5mm, 20 x 1.5mm and 22 x 1.5mm sleeve nuts, 1/2" x 10' high heat, high pressure oil hose, hose barb fittings, a cooler mounting kit and hose clamps. view full answer...
Absolutely! You can install the Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles # 90885 without ever having to remove the 7-way plug already installed on your 1996 GMC Sierra 1500. The # 90885 comes with a splice-in harness that connects to the wiring under your dash.
Since there is not a plug-and-play customized harness that is compatible with your truck, it is important to note that you need the 20-Amp circuit breaker # 9506P for 2- to 4-brake applications or the 30-Amp... view full answer...
The Aries Round Nerf Bars # AA204037-2 are designed to fit the 1978 GMC C/K Series with a regular cab. As long as your Sierra has the regular cab these will fit your truck. If you have the crew or extended cab there are no nerf bars that will fit so the only option would be side steps like the # CARR124031. view full answer...
There is a Timbren Rear Suspension Enhancement System that fits a 1988 GMC Sierra 1500, though not the part # TGMRCK25D you referenced, which is only a fit for the 2500.
Instead, the correct part for your '88 Sierra 1500 will depend on if your truck is 2WD or 4WD:
- 2-Wheel Drive: Timbren Rear Suspension Enhancement System # TGMRC25HD
- 4-Wheel Drive: Timbren Rear Suspension Enhancement System # TGMRCK25
These Timbrens absolutely come with the brackets and everything needed for installation;... view full answer...
You will want the Rampage 4-Layer Outdoor Truck Cab Cover # RA1321 for your 1994 GMC Sierra K1500 as it is an extended cab. The Cover # RA1320 you found is only for a truck with a regular cab. view full answer...
Go To Results